Their list isn't exactly right. The DE-660CT is also supported under the 8390.0 and whatever does ne.o for pcmcia services. But, (as usual) at least more works that what they know! Cheers, Phil M On Mon, 5 Feb 2001, Larry Cable wrote: > I just received this from D-LINK as I was having trouble getting my card to > work also. Hope this helps. > LarryC > > > D-Link Reference ID: TSE10205-125334 > (This is NOT an RMA number. It is for e-mail response tracking > purposes only.) > > > Dear Valued Customer, > > Here is a list of the most common D-Link Adapters for which Linux has > drivers developed. > > Adapter Drivers in Linux > > D-Link Adapter Linux Module Module Location > > > __________________________________________________________________________ > > > Desktop Adapters *.*.**-** = Kernel version (ie: > 2.2.12-20) > > DE-220 ne.o lib/modules/*.*.**/net > > DE-528ct ne2k-pci.o lib/modules/*.*.**/net > > DFE-500tx tulip.o lib/modules/*.*.**/net > > DFE-530tx via-rhine.o lib/modules/*.*.**/net > > DFE-530tx+ rtl8139.o lib/modules/*.*.**/net > > DFE-538tx rtl8139.o lib/modules/*.*.**/net > > DFE-540tx tulip.o lib/modules/*.*.**/net > > __________________________________________________________________________ > > Portable Adapters > *.*.**-** = Kernel version (ie: 2.2.12-20) > > DE-650 pcnet_cs.o lib/modules/*.*.**/pcmcia > > DFE-650 pcnet_cs.o lib/modules/*.*.**/pcmcia > > DFE-650tx pcmcia_cs.o lib/modules/*.*.**/pcmcia > > > DFE-660tx tulip_cb.o lib/modules/*.*.**/pcmcia > > > Note: > (1)These modules are found on most newer distributions of Linux. > > (2) Most PCMCIA drivers are found in pcmcia_cs 3.1.24 which can be > found at: http://sourceforge.net/project/showfiles.php?group_id=2405 > > Thank you for your technical question and feedback. If you are > continuing to have problems please contact our live support at > 949-790-5290.or resubmit the problem at > http://www.dlink.com/tech/contact/. > > > Thank You, > D-Link US Technical Support > 949-790-5290 > > > Note: D-Link receives a large volume of e-mail each day so please > include ALL previous e-mail exchanges with D-Link Technical Support > when sending replies. Thank you. > > > > > To: ustech at dlink.com > From: c15018 at nwa.com > cc: > bcc: > Subject: D-LINK DE-220PCT & RedHat Linux 7.0 > Assigned: Hieu N. > > I'm having trouble getting the D-LINK DE-220PCT to initialize. I've got > a dual boot system: WINNT and RedHat Linux 7.0. In WINNT the card is > set to IO=240 and IRQ=11 plug&play disabled and it works fine. In Linux > I have in /etc/modules.conf... > > alias eth0 nec2k-pci > nec2k-pci io=240 irq=11 > > > Upon booting in Linux I get insmod eth0 initialization failed. What > needs to be done to fix this?? > > Thanks > > LarryC > Larry.Cable at nwa.com > > > >Message: 6 > >Date: Sun, 04 Feb 2001 19:19:33 -0600 > >From: "d.j. callais" <djx at mediaone.net> > >To: TCLUG <tclug-list at mn-linux.org> > >Subject: [TCLUG] D-Link Cards > >Reply-To: tclug-list at mn-linux.org > > > >Does anyone have any experience installing the D-Link DFE 530TX+ network > >card? I am running RH 7.0 and trying to use the recommended driver > >rtl8139 and having no luck at all. > > > > > >Thanks > >D.J. > > > > > > > > > _______________________________________________ > tclug-list mailing list > tclug-list at mn-linux.org > https://mailman.mn-linux.org/mailman/listinfo/tclug-list > -- "To misattribute a quote is unforgivable." --Anonymous