Nate Carlson wrote:


> LinkSys USB100TX (Pegasus)
> NetGear EA101 (Kaweth; took a bit of messing around in the BIOS)

I must admit this is my first time getting a usb device to work in 
Linux. I can see the output of
cat /proc/bus/usb/devices
finds my D-Link DWL 120
I used this command
mknod /dev/usb/eth2 c 88 0
to initiate the node. -not the proper command
I have the acm and pegasus mods loaded.
 From what I have read, most usb adapters that are 10/100 use the 
pegasus driver.
It seems to me that I am missing a rudimentary process.
I can post the output of the /proc/bus/usb/devices if that would help.