Thanks Clay, According to the software that came with the card, the card is set to irq 11 and ne was using a setting of 3. I unloaded the module (ne) and reloaded it using io=0x300 and irq=11. I can now ping the other computers on the network. Now if I can just get through the gateway, more reading. On Wed, 18 Jul 2001, Clay Fandre wrote: > johndmiller wrote: > > > > I have just installed Caldera on an old p100 machine. I have a D-Link > > DE-220P and am using the ne and 8390 modules. I have assigned it the > > address of 192.168.0.4 and am able to ping itself. I have a hosts file > > listing the other computers on the network as well as its self. I have > > also added it to the hosts file of the other Linux machine. route has an > > entry for 192.168.0.0 as well as 127.0.0.0. > > > > Anyone have an idea what I am overlooking? > > Are you saying you can't ping anything except the localhost? Can other > machines ping your machine? Has the NIC ever worked? Are you sure you > have the correct setting for the NIC? I have had problems with ne2000 > cards when I give it the incorrect IRQ. The card is detected fine, but I > can't send anything in or out. Maybe something to check. > _______________________________________________ > tclug-list mailing list > tclug-list at mn-linux.org > https://mailman.mn-linux.org/mailman/listinfo/tclug-list >