On Tue, Jul 24, 2001 at 01:08:23PM -0500, Scott Lystig Fritchie wrote: > >>>>> "fi" == Florin Iucha <florin at iucha.net> writes: > > fi> The release notes for 2.4.2 say something about fixing SNMP: now > fi> snmpwalk _crashes_ the router. > > fi> Of course having a silly linux user in Minnesota able to extract > fi> silly traffic graphs with mrtg is not a corporate priority for > fi> CISCO but still... > > For the last couple of years I've been using MRTG to gather stats via > the Telnet interface. MRTG's support for external programs for stats > gathering is handy. See http://www.snookles.com/mrtg/ for the stats, > as produced by MRTG and by a summary script I wrote to put all the > 5-minute graphs into a single page, all the 15-minute, etc. > > Source code at http://www.snookles.com/matthew/675-mrtg-stuff/. Most > user-editable stuff is in the getrawdata.pl script (IP address, > password). There are some hard-coded paths in the other scripts, but > they're up at the top and should be obvious. I've also got a sample > crontab entry there. Thank you. I have implemented the same thing in C, over the serial port :). But I have liked not to have to do that, and let mrtg do it over snmp. florin -- "If it's not broken, is because you are not fixing it enough." 41A9 2BDE 8E11 F1C5 87A6 03EE 34B3 E075 3B90 DFE4