check to see of the module is installed - lsmod. if not install tulip and give it a try - insmod tulip I have a Linksys card (I don't know which on right off the bat) and I use the tulip driver. John Miller Dain Rauscher Inc. Application Services IS Capital Markets Phone 612-547-7573 Fax 612-547-7580 -----Original Message----- From: Liz Burke-Scovill [mailto:kethry at winternet.com] Sent: Monday, March 05, 2001 9:32 AM To: 'tclug-list at mn-linux.org' Subject: [TCLUG] Linksys revisted Sorry guys - I realize we had just had this discussion, but...evidently I'm missing something in the archives, and had missed the Linksys debate originally. I don't have the card you guys were discussing - I have the Linksys NC100 v2. Supposedly on the Linksys site, I would either use the ne2000 driver or the tulip driver - ne2000 isn't listed in RH 7.0, and I can't figure out what it is I'm supposed to be doing. I've tried looking for it in proc/pci (card is not listed). I've tried looking for the driver using lsmod, and nothing pertaining to ethernet cards is listed. The IRQ is listed as 11, and the i/o base is 6000. I can't find any conflicts, but that doesn't mean there aren't any. I've also looked at dmesg and found no reference to any NIC drivers. When I look at the PCI info using KDE Control Panel, I do find reference to an Ethernet Controller, unknown vendor. Anyway - I can't figure out how to get this card running. If I _have_ to get a new card I will, but I'd rather not, considering it's already a thorny issue in the house. Anyone have any experience with this card? Thanks, Liz -- Imagination is intelligence having fun... e-mail: kethry at winternet.com URL: http://WWW.winternet.com/~kethry/index.html _______________________________________________ tclug-list mailing list tclug-list at mn-linux.org https://mailman.mn-linux.org/mailman/listinfo/tclug-list