Here is the config set up for ipsec.conf. Also to start the tunnel you need to run, ipsec auto --add jeremy2ie (or whatever the connection is named.) config setup # THIS SETTING MUST BE CORRECT or almost nothing will work; # %defaultroute is okay for most simple cases. interfaces="ipsec0=eth0" # Debug-logging controls: "none" for (almost) none, "all" for lots. klipsdebug=none plutodebug=none #plutodebug=all # Use auto= parameters in conn descriptions to control startup actions. plutoload=%search plutostart=%search # Close down old connection when new one using same ID shows up. uniqueids=yes -- Bret Baptist Systems and Technical Support Specialist bbaptist at iexposure.com Internet Exposure, Inc. http://www.iexposure.com (612)676-1946 Web Development-Web Marketing-ISP Services