cbos>en Password: [hit enter] (or enter your password if you have one) cbos#set web disabled cbos#set web port 31337 cbos#set web remote 127.0.0.1 cbos#write cbos#reboot You should be able to telnet to 10.0.0.1 if you are using NAT on your router. If you are using a routed connection (i.e. /30 netblock), then you need to telnet to you IP address assigned to the router. If you don't see a prompt right away -- press enter. Make sure you are using CBOS 2.4.3 and you should be pretty well protected. I found it easiest to upgrade by connecting my router directly to my W2K machine and running that dumb disk of theirs. It seems to be a java app, so you might hack it to work with Linux under X. Or, if you know how, upgrade the old fashion way. Tom Veldhouse veldy at veldy.net ----- Original Message ----- From: "Simeon Johnston" <simeonuj at indivisuallearning.com> To: <tclug-list at mn-linux.org> Sent: Monday, October 22, 2001 8:19 AM Subject: RE: [TCLUG] cbos> > > > Ah, yes, I am talking about my DSL router prompt. (Now I know what > > to > > > call it.) Hmm, I am trying to install the Cisco 678 Code Red fix. > > (I > > > thought I already did this under Windows - before I blew M$ away and > > > installed RH7.1) Perhaps if one changes OSs, one has to refix > > > things(?). > > > > If you did the upgrade once, then you do not need to do it again. The > > upgrade only affected your Cisco 678 router's operating system, not > > the > > operating system of your PC. > > > Or perhaps you mean the suedo fix? They gave instructions before on how > to change some settings so that the code red wouldn't see it as an > attackable host. This wasn't the permanent fix. Cisco has since come > out w/ a new version that can be installed ( which is probably what > your trying to do now ). > > sim > > _______________________________________________ > Twin Cities Linux Users Group Mailing List - Minneapolis/St. Paul, Minnesota > http://www.mn-linux.org > tclug-list at mn-linux.org > https://mailman.mn-linux.org/mailman/listinfo/tclug-list >