hello- i have an ibm thinkpad a30p. i am running SuSE 9.0 and i cannot get the trackpoint to work properly. if i boot the computer with no mouse, the trackpoint is enabled in the bios. when X starts, i can move the cursor, but it acts very erratic. it goes from one end of the screen to the other very quickly, and records button presses when i did not press any buttons, etc. one time while troubleshooting, i enabled (in the bios) the trackpoint at all times, even when a mouse was plugged in. when i booted, the mouse acted very erratic - same as above. but as soon as i disabled the trackpoint everything was fine. here is a clip from my XF86Config: Section "InputDevice" Driver "mouse" Identifier "Mouse[1]" Option "Device" "/dev/mouse" Option "Name" "Autodetection" Option "Protocol" "IMPS/2" Option "Vendor" "Sysp" Option "ZAxisMapping" "4 5" EndSection and /dev/mouse points to /dev/psaux. i suspect this is a driver issue, but there are no specific trackpoing drivers for this laptop from ibm. any suggestions? kevin _______________________________________________ TCLUG Mailing List - Minneapolis/St. Paul, Minnesota Help beta test TCLUG's potential new home: http://plone.mn-linux.org Got pictures for TCLUG? Beta test http://plone.mn-linux.org/gallery tclug-list at mn-linux.org https://mailman.real-time.com/mailman/listinfo/tclug-list