Quoting Jon Schewe <jpschewe at mtu.net>: > Except that I need the traffic from the internal machines to appear to > come from the public addresses. > This is what NAT does. You have IP addresses 1, 2 and 3 which are routable and issued to you by your ISP. You have IP addresses 4,5,6,7,8,9 which are RFC1918 addresses on your internal network. You can set up NAT so that all traffic coming from IP 6,7,8 and 9 appers to source from IP 1. Additionally, you can statically map IP 2 to IP 4 so that any traffic going to 2 gets sent to 4, and vice versa. You can also do PAT, where traffic to a specific port on a certain external IP gets sent to one address and traffic to that same external IP on a different port gets sent to a different address. This sounds like what you want, email me off list if you want to discuss further. Thanks, Josh _______________________________________________ TCLUG Mailing List - Minneapolis/St. Paul, Minnesota Help beta test TCLUG's potential new home: http://plone.mn-linux.org Got pictures for TCLUG? Beta test http://plone.mn-linux.org/gallery tclug-list at mn-linux.org https://mailman.real-time.com/mailman/listinfo/tclug-list