On Thu, 21 Oct 2004 14:53:19 -0500, John T. Hoffoss <john.t.hoffoss at gmail.com> wrote: > The first thing I would try is both the SCSI cable and terminator. > They are relatively cheap, and you should have backups (if you don't > already) anyway, and it only takes a minute to change the cable and > terminator. From there, I would pursue the lines of thought pointed > out by others. But to start, keep it simple to rule that out. > > John John, Thanks for the reply. I did try several different cables and used both an active terminator and the on board jumper. Both caused the locks. I've tried about all I can think of. I was thinking of going to the 2.6 kernel in suse 9.1. I have come across one or two bits on the net about SMP kernels causing scsi bus freezes, but some of the stuff was pretty old (like 2.2 kernel stuff). I am going to try and boot to a single proc kernel and see if the same thing happens. cheers, rotbau _______________________________________________ TCLUG Mailing List - Minneapolis/St. Paul, Minnesota Help beta test TCLUG's potential new home: http://plone.mn-linux.org Got pictures for TCLUG? Beta test http://plone.mn-linux.org/gallery tclug-list at mn-linux.org https://mailman.real-time.com/mailman/listinfo/tclug-list