I am attempting to setup a bacula raid device I have a Promise 4310 4 port raid sata device and in the device bios I have it setup for raid 5. The device shows up in the hardware browser as a raid device so I am guessing it has the proper drivers. How do I mount the device so I don't have to use software raid and hammer my cpu during backups. Any advice would be great. Here is my fdisk -l Oh yeah I am running Centos 4.5 and it is installed on the primary scsi drive Thanks Disk /dev/sda: 18.3 GB, 18351959040 bytes 255 heads, 63 sectors/track, 2231 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 2231 17816085 8e Linux LVM Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 83 Linux Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdc1 1 60801 488384001 83 Linux Disk /dev/sdd: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdd1 1 60801 488384001 83 Linux Disk /dev/sde: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sde1 1 60801 488384001 83 Linux Justin Vogt BOLD Schools Technology Director Justin.Vogt at bold.k12.mn.us (320)523-1031 ext.117